ADSL 2 tester, hand-held ADSL 2+Tester
General Introduction :
With it's rugged design, ADT-10 is the ideal hand-held tool for installing and maintaining ADSL/ADSL2+ services. It enables engineer to verify the ADSL transmission parameters as well as ADSL error test, PING test and DMM test.
Features:
-Comply with various ADSL standards, could be used to test ADSL, ADSL2+ and READSL;
-Rugged design, potable,2.8 inch color LCD display;
-Programmable auto power-off function;
-User-friendly manual;
-Up to 99 results storage;
-Management software available for uploading testing results via RS232
-Results via RS232
Function:
-Verification ADSL transmission parameters (up/down actual and max. rates, attenuation,SNR margin,TX power, and etc.) ;
-Pass/fail indication and programmable thresholds ;
-Graphical bit/tone display ;
-Distance-to-short CRC,HEC,FEC,NCD,OCD bit error statistics ;
-Default 8 groups of VPI and VCI,
-Modem Emulation (Replace the user's ADSL Modem completely)
-PPPoE dial ;
-LAN Ping and WAN Ping ;
-DMM test, including line length test ;
-Uploading test results for analysis and process ;
Specification :
ADSL Tester |
Applied Standards | ITU G.992.1(G.dmt), ITU G.992.2(G.lite), ITU G.994.1(G.hs), ANSI T1.413 issue #2 , ITU G.992.5(ADSL2+) Annex L Compatible with ADSL,ADSL2+ and READSL |
Max. Testing Distance | 6.5km |
Channel Rate | Upstream Channel: 0-1.2Mbps; Downstream Channel: 0-1.2Mbps |
Attenuation | 0-63.5dB |
SNR Margin | 0-32dB |
DMM Tester |
Voltage | DC : - 110V - 110V | Accuracy : ±5%±2V |
AC : 0V - 290V | Accuracy : ±5%±2V |
Loop Resistance | 0 - 20KΩ | Accuracy : ±3%±2Ω |
Insulation Resistance | 0 - 1.0MΩ | Accuracy : ±0.1 MΩ |
1.0 - 50MΩ | Accuracy : ±5%±0.5 MΩ |
Capacitance | 0 - 10nF | Accuracy : ±2nF |
10 - 1000nF | Accuracy : ±3%±2nF |
Power Supply | AC/DC adaptor ; 2000mAH Li-ion Rechargeable Battery |
Operating Temperature | -30- +50 (Degree) |
Storage Temperature | -30~ +60(Degree) |
Humidity | 10% ~ 95% |
Dimension | 201 * 92 * 36 (mm) |
Weight | 460 (g) |